Sputter Coater 2 Dielectrics

Sputtering is one of the most widely used techniques for depositing thin films. The target is a plate of the materials to be deposited or the material from which a film is synthesized. Because it is connected to the negative terminal of a dc or RF power supply, the target is also known as the cathode. Typically, several kilovolts are applied to it. The substrate that faces the cathode may be grounded, electrically floating, biased positively or negatively, heated, cooled, or some combination of these. After evacuation of the chamber, a gas, typically argon, is introduced and serves as the medium in which a discharge is initiated and sustained. Gas pressures usually range from a few to 100mtorr. After a visible glow discharge is maintained between the electrodes, it is observed that current flows and that a film condenses on the substrate. In vacuum, of course, there is no current flow and no film deposition. Microscopically, positive ions in the discharge strike the cathode plate and eject neutral target atoms through momentum transfer. These atoms enter and pass through the discharge region to eventually deposit on the growing film. In addition, other particles (secondary electrons, desorbed gases, and negative ions) as well as radiation (X-rays and photons) are emitted from the target.

  • 4 circular substrate holders of 6” diameter.
  • Coating uniformity up to 3” substrate size with rotation. uniformity upto 1" circular area for stationary deposition.
  • Target dimensions – 3” dia and ≤ 6mm thickness.
  • Substrate heating up to 600 deg C using localized heaters.
  • Substrate planetary rotation is available for better film uniformity.
  • Using halogen lamp can heat the sample up to 100oC
  • Using 3 position gate valve vary the deposition pressure from 8e-4 to 5e-2 T
  • Target_list_sputter 2
  • Sputtering system supplied by Tecport, for dielectrics
  • DC sputtering, RF sputtering and Reactive sputtering are feasible.
  • Rotary Dry pump with a pumping speed of 1670 lit/min
  • Turbo Molecular pump for high vacuum with a speed of 1450 lit/sec, 31500 rev/min and its ultimate vacuum 8x10-8 T
  • Pirani, Penning, Full range and Baratron Gauges for chamber.
  • Three magnetrons in each unit– DC and RF in power sources sputter-2
  • RF bias is possible 
You are not authorized to access this content.

Days: First and second Wednesdays, every month.

Slot timings: 5 PM to 9 PM

Fill up Training Form to apply for tool training.

https://forms.office.com/Pages/ResponsePage.aspx?id=l80Vb6f240Gyxa1Bk5dkdk2fuyzNkZdHntjk1-WbwJpURFkxMElJSkoyUFgzNzlJT1dLVVk2MVlPTS4u

User has to attend the training sessions and then book  the slots for practice. (At least 3 parctice slots)

Then after user will be an authorized independent user.

Once you are an independent user you are supposed to book and use only the after office hours slots.